Page Comparison

Your experience of creating service requests in ServiceChannel Mobile becomes way more effective with the asset scanning capability. When you need to have a broken asset fixed, you can start creating your service request by scanning a QR code, barcode, or NFC tag on the faulty asset. The scanning ability helps you to achieve two things at a time:

Streamline the process of creating a work order. Once you’ve scanned an asset, the app searches for the corresponding asset in the Asset Manager database. When the match is found, you see relevant information on the asset and can associate it with a work order. Like your assistant, the app automatically fills out certain fields on the work order creation form with the information that corresponds to the scanned asset. Thus, with a proper issue list setup in place, you have less manual work to do.
Verify that the asset you’ve scanned exists in the Asset Manager database, and the information on the asset is correct.

Enabling Asset Scanning for SC Mobile

Asset scanning for the ServiceChannel Mobile app can be configured in Service Automation.

Panel

bgColor	#F9F9F9
titleColor	#0e3367
titleBGColor	#EAEAEA
borderStyle	none
title	⦿ How to Enable Asset Scanning for SC Mobile

Navigate to the Administration section of Asset Manager.
Switch to the Asset Rules tab. That’s the place where asset scanning and validation rules live.
Select the preferred scanning method under Scan Method.
(Optional) Pick Yes under Allow an SC Mobile user to change assets on work orders.
Hit Save to apply the settings.

Creating a Work Order with the Asset Scanning Capability

See a step-by-step instruction on how to scan an asset to create a new service request.

Panel

bgColor	#F9F9F9
titleColor	#0e3367
titleBGColor	#EAEAEA
borderStyle	none
title	⦿ How to Scan an Asset Upon Creating a Work Order

Tap New WO on the work orders list.
Select the location you want to submit a work order for. You land on the Create WO screen.

Specify which asset needs to be serviced by scanning an asset tag. When you are unable to scan, search for the asset manually.

Rw ui tabs macro

Rw tab

title	Scan an asset

1. Tap Scan, and select the scanning method. Based on your settings, the following methods may be available:

NFC tag
QR code / barcode
Info
When only one of these methods is enabled, you don’t have to select anything — the required method gets automatically launched.

2. Approach your device to the asset tag to scan.

Section

Column

width	50%

Asset is successfully scanned.

You see the asset details screen.

Column

width	50%

Asset match isn’t found.

Try to re-scan the asset tag. If that doesn’t work, search for the asset manually.

Section

Column

width	50%

Asset is successfully scanned and the asset details are displayed Image Modified

Column

width	50%

App couldn't find the match, and you get an error message Image Modified

Rw tab

title	Search for an asset

1. Tap Search for Asset. You see a list of assets available at the location.

Section

Column

width	50%

Clicking the link to manually search for the required asset Image Modified

Column

width	50%

List of assets to select the required one and add it to your new work order Image Modified

To quickly find the required asset, enter an asset Tag ID, Type, Brand, or Serial Number in the search box.

2. Once the desired asset is found, tap it to open the Asset Details screen.

On the asset details screen, tap Add Asset to associate the asset with the work order you are creating. The asset details appear on the WO creation form.
Section

Column
width 50%
Image Modified

Column
width 50%
Image Modified
Fill out the Area, Problem Type, Asset Type, and Problem Code. Then, tap Next to proceed.
Info
Some of these fields may get automatically filled out once you add an asset — when you have a proper issue list setup.
When applicable, check for duplicates and recalls.
When applicable, on the Troubleshooting screen, fully describe the problem in the text box so the service provider is as knowledgeable about your request as possible. Depending on your setup, you may also need to answer troubleshooting questions. When ready, tap Next.
Enter your phone number and detailed description of the required service. If necessary, add an attachment to your work order. Tap Next.
Review and edit the provided information on the Create WO screen if required. When ready, tap Confirm / Create WO to dispatch your service request to the provider.

Your work order is created with an associated asset and dispatched to the provider.

Live Search

spaceKey	SCU
additional	page excerpt
placeholder	Search our Knowledge Base
type	page

Panel

titleColor	#ffffff
titleBGColor	#5fa7d0
borderStyle	groove
title	In this Article

Table of Contents

maxLevel	3
minLevel	2
indent	20px

Panel

titleColor	white
titleBGColor	#75a346
title	Related Articles

Filter by label (Content by label)

showLabels	false
max	8
showSpace	false
sort	title
cql	label in ( "asset-rules" , "scmobile" ) and space = currentSpace ( )

Versions Compared

Old Version 12

New Version 13

Key

Enabling Asset Scanning for SC Mobile

Creating a Work Order with the Asset Scanning Capability